Submersible Motor Winding Wire POLYWRAP

Do not stack more than 4 coils otherwise, bottom coil is likely to get damaged due to upper coil weight.
Always keep away winding wire from those things having sharp edges and equipment generate heat to avoid unintentional damage. Also avoid welding spark falling on winding.
Motor manufacturers must ensure proper cable joining after winding to avoid megger or winding failer.

Generally conforms to IS : 8783, DIN 53483, and VDE 0472

500 Meters and 1000 Meters bundles available

0.4 mm to 3 mm conductor

Sr. No.	Nominal Conductor Diameter mm	Conductor Cross Sectional Area Nominal mm	Appx. Overall Diameter mm	Max. D.C Conductor Resistance ohm/km	Elongation (min.) %	Appx. Weight Per 1000m kg.
1	0.40	0.126	0.80	140	24	1.47
2	0.50	0.196	0.90	89.6	25	2.15
3	0.60	0.283	1.00	62.2	26	2.98
4	0.70	0.385	1.10	45.7	28	3.95
5	0.80	0.502	1.20	* 35	28	5.05
6	0.90	0.636	1.30	27.6	29	6.30
7	1.00	0.785	1.40	22.4	30	7.80
8	1.10	0.95	1.50	18.5	30	9.20
9	1.20	1.13	1.60	15.5	31	10.90
10	1.30	1.33	1.70	13.2	32	12.70
11	1.40	1.54	1.90	11.4	32	14.90
12	1.50	1.77	2.00	9.95	32	17.00
13	1.60	2.01	2.10	8.75	32	19.20
14	1.70	2.27	2.20	7.75	32	21.60
15	1.80	2.54	2.30	6.91	32	24.20
16	1.90	2.83	2.40	6.2	32	26.80
17	2.00	3.14	2.50	5.6	33	29.60
18	2.10	3.46	2.60	5.08	33	32.55
19	2.20	3.8	2.70	4.63	33	35.60
20	2.30	4.15	2.80	4.23	33	38.85
21	2.40	4.52	2.90	3.89	33	42.20
22	2.50	4.91	3.00	3.58	33	45.70
23	2.60	5.31	3.10	3.31	34	49.30
24	2.70	5.73	3.20	3.07	34	53.10
25	2.80	6.16	3.30	2.86	34	57.00
26	2.90	6.61	3.40	2.66	34	61.05
27	3.00	7.07	3.50	2.49	34	65.25

The number of wires and diameter mentioned in the table are approximate and nominal; however they shall meet the requirements of conductor resistance as per standards.
In view of continuous improvements in our design and process, the information, Dimensions and specifications given herein are subject to change without notice.

Get A Quote